Prices Include: Strike plate,
factory supplied medico cylinder(s) with two(2) keys and mounting screws.
Deduction in price if cylinders not provided. Builders hardware cylinder &
trim - US4 Finish.
Additional Pricing for (POA):
Builder Hardware Cylinder and Trim in US4 Finish
LEK (for 10300M Keyed 2 sides ONLY)
Note 1: Electrical interlocking
is done by controls not in above lock
Note 2: NL -
No Latch, the Latchbolt remains retracted as long as control switch is activated.
Allows Latchbolt to extend without opening door. Normally used with "D"
function. Latchbolt extends when power is removed. Specify NL(No Charge)
Note 3: D -
Half Cycle Holdback, remote two-position maintained-contact switch
is required for this function. Bolt is retracted electrically when switch is in
open position and extended when switch is in locked position.
Note 4: LEK -
Local Electric Key switch, key shall provide local electric operation when
selected from control panel with optional standard mechanical operation with key.
Note 5: ELC -
External Local Control Capability, used when pushbuttons or external
key switches are required.(No Charge)
Note 6: All prices in
1. Hinge Side: Standard
Builders Hardware 1 1/8" mortise cylinder with straight cam(yale type)
2. Stop Side: Standard
Builders hardware rim cylinder with horizontal-tailpiece. Cylinders require addition
of an extender. For jamb depths over 10" wide contact us for additional costs.
3. Cylinder extender
must be factory applied. Min. 4" Jamb depth. Jambs less than 4" use
builders hardware cylinder in length necessary.
4. When ordering extenders,
provide dimensions shown in Figure 1.
If cylinders are furnished by others rim cylinders must be sent to factory to
be fitted with extender.